Mercedes-Benz G-Class 2010 COMAND Manual - Manual (Page 163)

The way you can control the actions depends
on the DVD.
Video Aux
Aux Connectors
An external video source (Video Aux) can be
connected to COMAND via the Media
Interface (
Y page 146) 1/8 inch jack located
inside the glovebox.
Switching to Video Aux
From Another Main Function
X Select Video£Video£Video Aux
i If Video Aux mode was active last, you
only need to select Video.
Within the Video Function
X Select Video£Video Aux
The Video Aux menu appears. The medium
in the external video source is played,
provided it is connected and switched to
playback.
i Please refer to the relevant operating
guide for operation of the external video
source.
External video sources may have different
audio signal levels. You can choose between
two different input gain levels for the Aux
input.
R
Standard
To be used for external sources with a
medium to high audio signal level.
R
Boost
To be used for external sources with a low
audio signal level.
X To set the desired input gain level:
Select
Volume£Standard or Boost.
Video Aux Settings
The following settings can be made in Video
Aux mode:
R
Volume ( Y page 32)
R
Balance and fader ( Y page 33)
Video Aux
161
Video
Z