Mercedes-Benz G-Class 2010 COMAND Manual - Manual (Page 171)

Setting Treble and Bass
X Switch to the menu of the respective
operating mode
R
CD Audio ( Y page 171)
R
DVD Audio ( Y page 172)
R
MP3 ( Y page 172)
R
DVD Video ( Y page 174)
R
Aux ( Y page 179)
X Select Treble or Bass.
A setting scale appears.
X To change the value: Press the n or
ý button on the remote control.
X To confirm the setting: Press the 9
button on the remote control.
Multi-user Operation
The two display screens can be operated
almost entirely independent from each other.
For some menus, however, there can arise
conflicts if the two display screens are used
simultaneously.
Simultaneous Use of the Rear-
Compartment Disk Drive
If on both display screens the disc drive is
used, the selection of certain settings on one
screen will have an impact on the other
screen as well.
The following functions affect both screens:
R
Changing the playback options
R
Selecting a track (from track list or folder)
R
Using the Play, Stop or Pause function.
R
Using the fast forward/rewind function
R
Switching to DVD menu and and navigating
through it
R
Setting language, subtitle and camera
angle
R
Calling up interactive DVD content
The following functions affect only one
screen:
R
Changing Audio, Video or screen settings
R
Switching between full screen and menu
system.
Switching Operating Modes
When you leave an operation mode, e.g. CD
audio, its current settings are stored. If you
call up this operation mode later, there are
two possibilities:
R
The operation mode settings have been
changed on the other display screen.
R
The operation mode settings have not been
changed.
In the first case the operation mode settings
will be as they are on the other display screen.
In the second case the settings remain as
they were before you left the operation mode.
Functional Restrictions in DVD Video
Mode
Some functions may temporarily or
permanently not be available. If you use such
functions, you will see the symbol 7.
System Settings
All system settings can be set for each display
screen independently.
Calling up the System Menu
X Select System in the main function line.
The system menu appears on the selected
display screen.
System Settings
169
Rear Seat Entertainment
Z