Mercedes-Benz G-Class 2010 COMAND Manual - Manual (Page 24)

R
the telephone and the address book
function
R
DVD video
R
systems settings
You can call up the main functions:
R
using the hard keys Ø, $, %,
h or W.
R
using the main function line in the
COMAND display
COMAND Display
i Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. Should
the display need cleaning, use a mild
cleaning agent and a soft, antistatic, lint-
free cloth. Commercially available alcohol
and ammonia-free TFT or LCD cleaners are
recommended.
The COMAND display shows the function
currently selected and its associated menus.
The COMAND display is divided into several
areas.
The radio display is shown in the example.
Example: Audio main function display
1
Status line
2 Main function line
3 Main area
4 Submenu line
Status line 1 displays the time, the current
telephone status and the following symbols
indicating various operation modes.
X
Audio playback muted
CD/DVD inserted
active source to rear
copying process active
With the main function line 2 you can select
the main function. The selection is made
using the ; and = buttons
(
Y page 27).
In the example, the audio main function is set
to radio mode and the main area 3 is active.
i The arrangement of the menus can vary,
depending on the equipment. Normally, the
menus for the full equipment version are
shown in this guide.
Menu Overview
Having selected a main function, you will find
the submenu line at the bottom edge of the
COMAND display.
If one of the main functions such as
Navigation, Audio, Video or Phone is currently
selected, additional menus are available from
the main function line (
Y page 23).
This is indicated by a small triangle behind the
main function label.
1 Triangle indicating an additional menu
22
COMAND Control System
At a Glance