Introduction, Where to find it, At a glance – Mercedes-Benz G-Class 2010 COMAND Manual User Manual
Page 18: System settings, Navigation, Telephone, Audio, Video, Rear seat entertainment (rse), Voice control
This operator's manual has been designed to
help you use your COMAND control unit in all
situations. Since not all models have the
same standard equipment, your COMAND
system equipment may deviate from some
descriptions and illustrations.
Here you will find an overview of the
components of COMAND. Then you will find
examples illustrating how to operate
COMAND and information on the basic
functions. If you are operating a COMAND for
the first time or have rented the vehicle, you
should first read this chapter.
Here you will find all the important
information regarding the system settings of
the COMAND.
Here you will find detailed information
regarding the following topics:
R
Setting options for the map display and the
route calculation
R
Destination input
R
POI input
R
Route guidance
R
Traffic information
R
Destination memory
The telephone functions are described here.
You will also find information on the address
book.
Here you will find all information regarding
the audio function and its Radio, HD Radio,
SatRadio, CD-audio/DVD audio/MP3, Music
Register, Media Interface and Audio Aux
modes.
Here you will find all information regarding
the video system.
In this chapter the Rear Seat Entertainment
is explained.
Here you will find information about operating
several COMAND functions via Voice Control.
Here you will find information on how to use
Tele Aid and the Search & Send function.
Content and keyword indexes are intended to
help you find information quickly.
You will find the following symbols in these
operating instructions:
Warning notices draw your attention to
hazards that may endanger your health or life,
or the health or life of others.
!
Highlights hazards that may result in
damage to your COMAND.
16
Symbols
Introduction