Voice control, Switching the help screen on or off, Individualization function – Mercedes-Benz G-Class 2010 COMAND Manual User Manual
Page 43: System settings
Switching the Help Screen On or Off
X
Select
System£Settings£Voice
Control.
X
Select
Help Window.
You have switched the help window on
Ç or off c.
i
In addition to the audible instructions, the
help screen displays other information
during the individualization process and the
later voice control mode.
Individualization Function
You can use the individualization function
option to adapt the Voice control system to
your own voice and therefore improve voice
recognition. This will affect the ability of the
system to recognize the voices of other users,
and for this reason it can be switched off
(
The individualization function comprises two
parts and lasts around five minutes. During
the process you will practice a few number
sequences and voice commands.
Starting New Individualization Process
i
You can only start the individualization
function when the vehicle is stationary.
First switch off all interfering units/
functions. After starting, the system will
take you through the training by means of
audible instructions.
X
Select
System£Settings£Voice
Control£Start New
Individualization.
You see and hear a prompt asking whether
you would like further information.
X
Select
Yes or No.
If you select
No, the first part of
individualization begins. You hear a prompt
asking whether you would like to train the
system in numbers or in voice commands.
If you select
Yes, an information screen will
appear and you will hear information about
the sequence of the individualization
process. The first part of the
individualization then starts automatically.
Once the first part is over, you will be
prompted to confirm that you wish to start the
second part.
X
Select
Yes or No.
If you select
No, individualization will be
canceled. The data from the first part is
saved automatically.
If you select
Yes, the second part of the
individualization will start.
The individualization is ended once the
second part has been completed. A
corresponding message is displayed. The
data from the second part is saved
automatically.
Voice Control
41
System Settings
Z