Mercedes-Benz CL-Class 2010 Owners Manual - Manual (Page 176)

Switching to video AUX operation
(COMAND)
X Select Video Q AUX.
The video AUX menu appears. You will hear
and see the medium in the external audio
source provided it is connected and set to
playback.
i For operation of the external video
source, refer to the operating instructions
of the respective device.
You can adjust the following during video AUX
operation:
R
Brightness, Contrast and Color
(
Y page 177)
R
Picture format ( Y page 177)
R
Volume ( Y page 76)
R
Balance and fader ( Y page 77)
R
Treble and Bass ( Y page 77)
R
3D Sound ( Y page 77)
COMAND video DVD
Safety notes
G Observe Safety notes, see page 162.
Automatic picture fade-out
If a video DVD is playing when the vehicle is
shifted from park position
P into neutral
position N or drive position D the picture is
faded out automatically and the following
message appears in the display:
In order
not to distract driver, picture is
faded out while the vehicle is in
motion.
When the vehicle is shifted back into park
position
P, the picture comes on again.
When the vehicle is shifted into reverse gear
R, the rear view camera appears in the display
during video DVD playback.
Notes about video DVD operation
COMAND can playback commercially
available, prerecorded video DVDs that bear
the following label. You will usually find the
label on the DVD booklet, the inlay, or the
DVD itself.
i Video DVDs differ from recordable DVD-
R and DVD-RW discs.
i There may be playback problems when
playing copied DVDs.
There is a large variety of discs, disc-writing
software and writers available. This variety
means that there is no guarantee that the
system will be able to play discs that you
have written/copied yourself.
Some DVDs may not comply with the NTSC
or PAL TV playback standards. Sound, picture
and other playback problems may occur
when you play such DVDs.
COMAND can playback video DVDs meeting
the following requirements:
R
Correct regional code
R
NTSC or PAL TV standard
The appropriate information is usually given
either on the DVD or the DVD box. The factory
setting of COMAND is regional code 1. This
setting can only be changed five times at
most by an authorized Mercedes-Benz
Center. This will allow you to playback video
DVDs with other regional codes, as long as
they comply with the NTSC or PAL TV
standard.
Notes about DVDs
! Do not affix stickers or labels to the discs.
These could peel away and damage
COMAND. COMAND is designed to hold
174
COMAND video DVD
Control systems
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 174