Use the vehicle status message memory
function to scan malfunction and warning
messages that may be stored in the system.
Such messages appear in the multifunction
display and are based on conditions or
system status the vehicle’s system has
recorded.
The vehicle status message memory function
only appears if there are any messages
stored.

Warning!

Malfunction and warning messages are only
indicated for certain systems and are
intentionally not very detailed. The
malfunction and warning messages are
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner’s and/or driver’s
responsibility to maintain the vehicle’s
operating safety. Have all required
maintenance and safety checks performed on

the vehicle. Bring the vehicle to an authorized
Mercedes-Benz Center to address the
malfunction and warning messages.

Press button = or ; to select the
Service menu.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:

2 Messages.

Press button : or 9 to select the
Messages function.

Press button a to confirm.
For malfunction and warning messages,
see “Vehicle status messages in the
multifunction display” (

page 414).

Use button : or 9 to scroll through
the messages.

If you turn the SmartKey in the starter switch
to position

0 and then back to position 2, all

messages will be deleted from the message
memory.

Settings menu

In the

Settings menu the following functions

are available: