Mercedes-Benz C-Class 2008 Owners Manual - Manual (Page 167)

166
Controls in detail
Control system
Resetting all settings
You can reset most of the functions of the
submenus to the factory settings.
̈ Press ( or & to select the
Settings menu.
̈ Press % or $ to select the
Factory settings function.
̈ Press #.
The menu Reset to factory settings
No/Yes appears in the multifunction
display.
̈ Press % or $ to select Yes or No .
Select Yes if you want to reset to facto-
ry settings.
̈ Press # to confirm.
The confirmation message appears in
the multifunction display.
The functions of the submenus will re-
set to factory settings.
Submenus in the Settings menu
̈ Press ( or & to select the Set-
tings menu.
̈ Press % or $ to select a sub-
menu.
The submenus are arranged by hierarchy.
Scroll down with
%, scroll up
with $.
With the selection marker on the desired
submenu, use the
# to access the indi-
vidual functions within that submenu.
Once within the submenu, you can use
the
$ to move to the next function or
the % to move to the previous function
within that submenu.
The table below shows what settings can
be changed within the various submenus.
Detailed instructions on making individual
settings can be found on the following
pages.
i
For safety reasons, the following function
are not reset while driving:
ț the Headlamp mode function in the Light-
ing submenu