Mercedes-Benz C-Class 2008 Owners Manual - Manual (Page 197)

196
Controls in detail
Audio system
Switching to radio mode
̈ Press button b on audio control
unit.
The radio basic menu appears in the
audio display once you have switched
to radio mode. You will hear the
station/channel last tuned in the previ-
ously selected waveband, provided
that the station/channel can be re-
ceived.
Illustration: radio mode in FM waveband
1 Status line
2 Station name
3 Store position of station
4 Main area with waveband
Information displayed in the status line
(example)
The following information is displayed in
the status line:
ț Time ( 04:38 )
ț Station name ( WNYC )
Mobile phone readiness is indicated by
additional information being shown:
ț Mobile phone network signal
strength I
ț Receiver symbol 4 ö.
Calling up wavebands
You can choose from among the FM, AM
and WB wavebands and then request the
Sat mode*. Pressing again will switch back
to FM radio mode.
̈ Press button b on audio control
unit repeatedly until desired waveband
has been selected.
The FM, AM, and WB wavebands and
the satellite radio* mode are called up
one after another.
The waveband currently selected
appears in the status line of the audio
display. The last selected station in the
selected waveband is heard.
i Station names 3, available for the FM
waveband, can only be seen when the station
transmits a name.
In the WB waveband, the audio system displays
the channel number, e.g. Channel 6, instead of
the station names and/or frequency.
Waveband Frequency
WB (Weather Band) Weather channels
FM 87.7......107.9 MHz
AM 530.......1710 KHz