Mercedes-Benz C-Class 2008 Owners Manual - Manual (Page 91)

90
Controls in detail
Seats
Removing and installing rear seat head
restraints (vehicles with split foldable
rear seat)
1 Release button
̈ Removing: Unlock the rear seat back-
rest and fold it slightly forward
(
୴ page 281).
̈ Pull head restraint to its highest
position.
̈ Push release button 1 and pull out
head restraint.
̈ Installing: Position the head restraints
so that the notches on the rod are on
the left when looking in the direction of
travel.
̈ Insert head restraint and push it down
until it engages.
̈ Fold the rear seat backrest back until it
engages (
୴ page 282).
̈ Push release button 1 and adjust
head restraint to desired position.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the
potential for injury to the head and neck in
the event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
i The rear head restraints cannot be removed
on vehicles which do not have the split foldable
rear seat.
i Adjust the head restraint in such a way that
it is as close to the head as possible.