3 numeric data entry – Rice Lake Chair Scales User Manual
Page 13
Chair Scale Technical and Operating Instructions - Scale Configuration
9
Various parameters can be set up while in configuration mode.
Figure 4-2. Configuration Mode Menu Structure
4.3
Numeric Data Entry
Use the
Kg-Lb
key to change the numeric data entry while setting up the various configuration parameters and
while in calibration mode.
Use the following steps:
1. Press and hold the
Kg-Lb
key, the rightmost digit on the display will begin to increment.
2. Release the
Kg-Lb
key to stop the increments.
3. A double click on the
Kg-Lb
key will cause the right hand digit to move one place to the left.
4. Repeat steps 1-3 until the desired number is reached.
Power Off
Power On-Off
START
Kg-Lb Key
0.000
Software Version
Round xx
Full xxx
At
Press and
hold
OP1=X
SAVE
T-OFFX
DONE
OP2=X
OP4=X
OP3=X
OP5=X
OP7=X
OP6=X
OP8=X
Press and
hold the
Kg-Lb key
to advance
to option
2 through
option 8.
= DEF =
A TOLXX
Drange
A LEN X
MESS
A TImE XX
BAUD XX
Software ID
SET=X
OP9=X
OP10=X
GRAV x.xxxx