Rice Lake CW-90X Over/Under/Washdown Checkweigher - Ethernet User Manual
Page 13
Ethernet TCP/IP Card Installation Manual - Assigning an IP Address
9
Figure 3-4. Web Configuration Serial Settings
Refer to the Lantronix User’s Guide for further instructions on Ethernet configuration by Telnet.
Rice Lake indicators can act as an Ethernet – TCP/IP to RS-232 converter. The converter can act as a
server and accept an incoming connection, or, through a special serial command prepended to a serial
transmission, it can connect to remote servers. Once a connection is established, Rice Lake indicators
can send commands and handle responses using the internal serial API.
To terminate a connection from the indicator, set a transmission idle time out on the Ethernet card. After “X” amount of
time without transmission from the indicator, the card terminates the connection.
Note