Rice Lake CW-90X Over/Under/Washdown Checkweigher - Ethernet - Manual (Page 20)

16 Ethernet TCP/IP Card Installation Manual
Select 0 for your choice and press Enter .
10. The next menu choice is Network Name as shown below.
Figure 4-12. Network Name Screen
Enter your wireless network name as your menu choice and press Enter . This identifies the network that the
wireless option will run on.
11. The next step is to select a level of security as shown in Figure 15.
Figure 4-13. Security Level Select Screen
Security levels include:
• 0 = None
• 1 = WEP (Equivalency Protection)
• 2 = WPA
Select 1 and press Enter .
12. The next step is to set the authentication level for the configuration as shown below.
Figure 4-14. Authentication Screen