Rice Lake Datalogic QuickScan QD2100 Linear Imager Hand-held Scanner - Manual (Page 277)

Standard Cable Pinouts
Product Reference Guide 269
Standard Cable Pinouts
Figure 7 and Table 36 provide standard pinout information for the imager’s cable.
Figure 7. Standard Cable Pinouts
The signal descriptions in Table 36 apply to the connector on the imager and are for ref-
erence only.
Table 36. Standard Cable Pinouts — Imager Side
Cable Clip (Latch)
To Host
Cable
Cable Strain Relief
Bottom of Imager
Interface Cable Port
Pin 1
Pin 10
Pin RS-232 OEM USB Keyboard Wedge
1 RTS (out)
2 D+ CLKIN (KBD side)
3 D- DATAIN (KBD side)
4 GND GND GND GND
5 RX
6 TX
7 VCC VCC VCC VCC
8 IBM_B CLKOUT (PC side)
9 IBM_A DATAOUT (PC side)
10 CTS (in)