Beep on ascii bel, Beep on not on file, Beep on ascii bel beep on not on file – Rice Lake Datalogic QuickScan QD2100 Linear Imager Hand-held Scanner User Manual
Page 58: Default
Advertising
RS-232/USB-Com Interfaces
50
QuickScan® QD2100
Beep On ASCII BEL
When this parameter is enabled, the reader issues a beep when a <BEL> character is de-
tected on the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal
entry or other important event.
Beep On Not on File
This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.
ENTER/EXIT PROGRAMMING MODE
Beep On ASCII BEL = Disable
Beep On ASCII BEL = Enable
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Beep On Not On File = Disable
Beep On Not On File = Enable
DEFAULT
Advertising