Rs-232 only interface, Introduction, Rs-232 standard factory settings – Rice Lake Datalogic QuickScan QD2100 Linear Imager Hand-held Scanner User Manual
Page 49: Baud rate, Chapter 5. rs-232 only interface, Rs-232 standard factory settings baud rate, Chapter 5, rs-232 only interface, Starting on, Chapter 5 rs-232 only interface
Advertising
Product Reference Guide
41
Chapter 5
RS-232 ONLY Interface
Introduction
Use the programming barcodes in this chapter if modifications to the standard RS-232
interface settings are necessary to meet your system’s requirements. Additional settings
which apply to both the RS-232 and USB interfaces are available in
RS-232 Standard Factory Settings
Reference
for a listing of standard factory settings.
Baud Rate
Baud rate is the number of bits of data transmitted per second. Set the reader's baud rate
to match the baud rate setting of the host device. With an improper baud rate setting,
data may not reach the host correctly.
ENTER/EXIT PROGRAMMING MODE
Baud Rate = 1200
Baud Rate = 2400
Baud Rate = 4800
Advertising