Rice Lake GoDEX DT4 User Manual User Manual
Page 20
Advertising
DT2 / DT4 User Manual
18
IP Setting
The IP Setting tab can change the printer name, Port number, Gateway setting and the
password for configuring the printer. You can also set the printer’s IP address ether by DHCP or
by Static IP.
You can press “Set” button to apply the settings and “ReGet” button to refresh the setting values.
【
Note
】
To fully benefit from the NetSetting software, you should be familiar with basic networking
principles. Please contact your network administrator for related network setting information.
Advertising
This manual is related to the following products: