Safety instructions – Rice Lake GoDEX DT4 User Manual User Manual
Page 3
Advertising
DT2 / DT4 User Manual
1
Safety instructions
Please read the following instructions carefully.
1.
Keep the equipment away from humidity.
2.
Before you connect the equipment to the power outlet, please check the voltage of the
power source.
3.
Make sure the printer is off before plugging the power connector into the power jack.
4.
It is recommended that you connect the printer to a surge protector to prevent possible
transient overvoltage damage.
5.
Be careful not to get liquid on the equipment to avoid electrical shock.
6.
For safety and warranty reasons, ONLY qualified service personnel should open the
equipment.
7.
Do not repair or adjust energized equipment under any circumstances.
Advertising
This manual is related to the following products: