Rice Lake Intercomp CS 5000 - Users Manual - Manual (Page 10)

CS5000, Users
Rev V, January, 2008
10
Setup
Use the following procedure to setup and weigh:
1: Hook CS5000 scale head onto hoist.
2: Turn on CS5000 scale head.
3: Turn on CS5000 base.
4: Hook any weighing fixtures onto CS5000 hook (chains, etc.)
5: Hook any weighing bin or platform onto CS5000 hook or fixtures.
6: Hoist into air so that it is free swinging.
7: Press ZERO on base. The CS5000 will wait for a stable zero reading.
8: Proceed with weighing.
lb/kg Switching
Press the TOTAL DISPLAY and TARE DISPLAY keys together to switch lb/kg. This
toggles the weighing system between pound (English) and kilogram (SI metric) units of
measure. The current unit of measure is shown by the left indicators of the CS5000 base
(as shown in the section Display (Base) ).
Setting time and date
To set the time and date press the three keys labeled TARE, TARE DISPLAY, and TARE
CLEAR together and release. The scale will then ask you to enter seven numbers
representing the month, day, year, hour, minute, second, and am/pm. You increase the
number by pressing the TARE DISPLAY button. When the number is set, pressing the
TARE button moves on to the next number. When you have completed entry of all seven
numbers press the TARE CLEAR button to exit and start the clock running. The numbers
are displayed in the following format Hx-yy, were x is the number being set and yy is the
value. The following chart shows the seven values and their ranges.
Display Meaning Range
H1-yy H1-yy H1-yy H1-yy Month 1-12
H2-yy H2-yy H2-yy H2-yy Day 1-31
H3-yy H3-yy H3-yy H3-yy Year 0-99
H4-yy H4-yy H4-yy H4-yy Hour 1-12
H5-yy H5-yy H5-yy H5-yy Minutes 0-59
H6-yy H6-yy H6-yy H6-yy Seconds 0-59
H7-yy H7-yy H7-yy H7-yy am/pm 0-1 (0 = am, 1 = pm)
If the year is set prior to '91 it will be displayed as 20xx.