Rice Lake Intercomp CS 5000 - Users Manual - Manual (Page 29)

CS5000, Users
Rev V, January, 2008
29
The signals for the two channels exist the box through the six pin connector on the bottom
of the box. The wiring is listed on the following chart:
Pin# Connection
A CH1 TXD
B CH1 CTS
C CH1 GND
D CH2 TXD
E CH2 GND
F NC
Example Connections
The connection of CH1 to a 9-pin PC communications port is:
CS5000 9-pin PC
A (TXD) 2 (RXD)
B (CTS) 7 (RTS)
C (GND) 5 (GND)
NOTE: For some setups it may be necessary to jump pins [6, 1, and 4] together on
the PC port connector.
The connection of CH1 to a 25-pin PC communications port is:
CS5000 25-pin PC
A (TXD) 3 (RXD)
B (CTS) 4 (RTS)
C (GND) 7 (GND)
NOTE: For some setups it may be necessary to jump pins [6, 8, and 20] together
on the PC port connector.
The connection of CH2 to an Intercomp S400 display is:
CS5000 S400
D (TXD) 2 (RXD)
E (GND) 7 (GND)
The connection of CH2 to an Intercomp SA2000 display is:
CS5000 SA2000
D (TXD) 3 (RXD)
E (GND) 7 (GND)
cont’d on next page