Introduction, Specifications, Controls – Rice Lake Intercomp CS 5000 - Users Manual User Manual
Page 3: Electrical, Performance, Environmental
CS5000, Users
Rev V, January, 2008
3
Introduction
This manual contains specifications, operation instructions, and calibration instructions for
Intercomp's model CS5000 crane scale.
Specifications
Controls
General:
Head:
Base:
On (Base remotely turns the scale head off).
On/Off ,Zero, Print, Total, Display Total, Clear Total, Tare
Set, Tare Display, Tare Clear.
Display:
Base:
5 ½ digit LED.
Indicators: Head:
Base:
power.
lb/kg, Tare, Net, Gross, On-screen Motion, Total.
Electrical
Batteries:
(Base and Head)
8 X D-size disposable alkaline dry cells or rechargeable
Nickel-Cadmium cells.
Battery life:
Up to 50 hours with alkaline batteries. Approximately 20
hours on a set of fully charged Ni-Cad cells.
Resolution:
20 bit A/D delivers over 1,000,000 internal counts.
Filtering:
6 Pole, 10 Hertz low pass.
Auto off:
Low battery, or after adjustable time without use or motion.
Auto-Zero:
Satisfies all HB-44 requirements; selectable 0.6, 1, or 3
graduations.
Performance
Accuracy:
±0.1% of applied load or ± display graduation, whichever
is greater.
Speed
2 readings / sec.
Transmitting Range Up to 500 ft / 150 meters
Environmental
Humidity:
10 to 95% Non-Condensing
Temperature:
Storage: -40 C to +75 C. / -40 F to +170 F.
Operating -10 C to +50 C. / +14 F to +122 F.