Serial output – Rice Lake Intercomp CS 5000 - Users Manual User Manual
Page 28
CS5000, Users
Rev V, January, 2008
28
Serial Output
The CS5000 base has available two communications channels, the standard interface for
both is RS-232. One is equipped with a CTS (clear to send) line and designed primarily for
hookup to a printer. The second channel consists of signal wires only and is designed
primarily for hookup to a score board or computer.
Channel 1 outputs a ticket:
Channel 2 outputs the net weight:
There is a five switch dip pak located on the main circuit board inside the base unit, it's
switches have the following meanings:
Switch #
On
Off
Function
1
1200
9600
Channel 1 baud rate
2
1200
9600
Channel 2 baud rate
3
on
off
Channel 1 continuous print
4
on
off
Channel 2 continuous print
5
on
off
RF interface (must be turned on, on CS5000)
The Items in bold indicate the suggested defaults.
NOTE: The RS-232 communication parameters: Fixed 8 data bits, no parity, 1 stop bit.
Each channel will print under two conditions:
1: If the print key is pressed.
2: If the continuous print is turned on.
cr/lf
-XXXXXX.X lb G cr/lf
-XXXXXX.X lb N cr/lf
-XXXXXX.X lb T cr/lf
-XXXXXX.X lb TOTAL cr/lf
lf
lf
JAN DD, 19YY HH:MM:SSam cr/lf (the 19 could be 20, and the a could be p)
lf
lf
-XXXXXX.X lb cr/lf