Rice Lake Intercomp SW™ Deluxe Portable Vehicle Scale - Manual (Page 10)

SW Users
Rev G, February, 2000
10
Selecting pads
On various display screens a S, T, and % line are shown; they have the following
means:
S: Total selected weight (total of pads turned on).
T: Total weight (total of all four pads).
%: The percentage the total selected weight is to the total weight.
To change which pads are selected use the LF, RF, LR, RR, ALL, left arrow, right
arrow, up arrow, down arrow. The arrow to the right of each pads weight display is
turned on if the pad is selected and off if it is not.
LF: Toggles left front pad on and off.
RF: Toggles right front pad on and off.
LR: Toggles left rear pad on and off.
RR: Toggles right rear pad on and off.
ALL: Turns all four pads on.
Left arrow: Turns LF and LR on, RF and RR off; for left side.
Right arrow: Turns LF and LR off, RF and RR on; for right side.
Up arrow: Turns LF and RF on, LR and RR off; for front side.
Left arrow: Turns LF and RF off, LR and RR on; for rear side.
Display format
The SW Scale has nine basic display screens. The Actual (weight on pad), Target
(weight you want on the pad), and Tune (the difference); can be displayed as either
weight, percentage, or weight and percentage. This gives a total of nine screens (see
appendix B for display screen examples).
The SHOW AS (WGT, %, or WGT & %) keys pick how the information will be
displayed. The SHOW (TARGET, TUNE, or ACTUAL) keys pick what information will
be displayed.
Period
Pressing the period (.) key will display information about the current display,
press period to return to the normal screen. The information displayed is: what
is currently being viewed, the current unit of measure, and the current register
number; see Appendix B.