Rice Lake Intercomp SW™ Deluxe Portable Vehicle Scale - Manual (Page 34)

SW Users
REV G, February, 2000
34
Serial Output (Optional)
The serial output for the SW can output to a 1200-baud printer . The signal comes out
of the Serial I/O connector located in the lower right corner of the keypad. The
connector has the following pinout:
Signal Pin
9V Printer Power A
GND B
NC C
CTS D
TXD E
GND F
Printer
The printer output is designed to connect with a 1200-baud printer. The transmitted
signal has the following characteristics:
Fixed 1200 baud, 8 Data bits, no parity, 1 stop bit.
See the “Printing (optional)” and “Appendix A” sections for more information on printing.