Rice Lake Intercomp SW™ Deluxe Portable Vehicle Scale - Manual (Page 20)

SW Users
Rev G, February, 2000
20
Error messages
PRESS TEST
As the message implies, press the TEST key to restart the SW
control box. If this message repeatedly returns and won't allow
you into the normal weighing mode, call Intercomp for service.
OFF
The weight present on the pad exceeds the pads capacity, or
the pad is not plugged in, or the pad may have failed. The
weight of an 'off' pad is set to zero so the scale can be
operated without a pad plugged in.
REGISTER EMPTY The register that was chosen has never been used or the data
in it was corrupted.
LOW BATTERY
Battery power is low. Scale will shut off after displaying “Low
Battery”. If Ni-Cad cells are being used, recharge the batteries.
If you are using alkaline cells, replace the batteries.