Rice Lake Intercomp SW™ Deluxe Portable Vehicle Scale - Manual (Page 13)

SW Users
Rev G, February, 2000
13
Current Actual
This method takes the current weight on the pads and saves them as the
targets.
Wedge
The wedge method requires you to enter the desired total weight, the left
side percentage, the rear side percentage, and the wedge (LR+RF)
percentage. From this information the scale calculates what the four
wheel target weights must be.
Keying
This method simply allows you to enter the four target weights.
Set Target %
SET TARGET % allows you to specify the total weight of the car, than enter what
percentage of that total you want each wheels target to be set to.
Features Menu
You enter the features menu by pressing the ENTER key. This menu gives you access
to the special display modes that are available. Press the number of your choice.
1: CG (Center of Gravity) Also see Appendix C
2: Vertical CG (Vertical Center of Gravity) Also see Appendix C
3: Special Displays
4: Normal Weighing
Normal weighing (choice 4) returns you to displaying the actual weight as a weight.
This is the equivalent to pressing SHOW AS WGT and than SHOW ACTUAL.
See Appendix B for display screen examples.