Rice Lake Legal For Trade Platform/Fitness Scale - Rice Lake Dietary Fitness Scale Technical and Operating Instructions - Manual (Page 19)

Dietary/Fitness Technical and Operating Instructions - Scale Configuration 15
3 Press and hold the BMI/Tare
key for five seconds until
HP1=0 appears Enters the Deep
Programming Mode -
shows optional feature
one. There are six
options in this
parameter, all set to 0 at
the factory. Do not
change these settings.
Press the REWEIGH
key to continue to Step
4 HP1=0
HP2=0
HP3=0
HP4=0
HP5=0
HP6=0 Hold the Kg-Lb key for browsing
through the options. Double click on
the Kg-Lb key to change the option
value. Single click the Kg-Lb key
again to advance to the next option.
Press the REWEIGH key to jump to
the next step. These are factory set to
0 - do not change.
4 Zero Tracking Time trAC-t <-> 30 Zero Tracking Time X 0.1 sec (30 = 3
seconds)
5 Zero Tracking Range trAC-r <-> 2 Zero Tracking Range X DIV/4 (2 = 0.5
DIV)
6 Auto-Zero Negative
Weight nEG-t <-> 20 Auto-zero of negative weight value
time X 0.1 sec (20 = 2 seconds)
7 High Absolute Zero HI-Abs <-> 2 Absolute high limit for zero in % of FS
8 Low Absolute Zero LO-Abs <-> 2 Absolute low limit for zero in % of FS
9 High Relative Zero HI-rel <-> 2 Relative high limit for zero in % of FS
10 Low Relative Zero LO-rEL <-> 2 Relative low limit for zero in % of FS
11 Filter Speed SPEEd <-> 4 Filter Speed - leave set to four
12 Filter Coefficient FILtEr <-> 4 Filter Coefficient - leave set to four
13 Stability Control StAbLE <-> 64 Stability Control - leave set to 64
14 StArt of SAvE If no changes were made in the
parameters, the display will
automatically StArt and then return to
normal weighing mode. If a parameter
was changed, the display will show
SAvE - then press the REWEIGH key
to save the new parameters.
15 Re-install the programming /
calibration jumper that was
removed at the beginning of
the procedure. Display will
show COn En
as long as the
jumper is not in
place. Replace
jumper to show
weight.
Step Function Display Available Para
Table 4-2. Deep Programming Mode Menu Structure