Rice Lake Legal For Trade Platform/Fitness Scale - Rice Lake Dietary Fitness Scale Technical and Operating Instructions - Manual (Page 29)

Dietary/Fitness Technical and Operating Instructions - Troubleshooting & Testing 25
Press the
Kg-Lb
+
REWEIGH
to exit Test mode.
Power On-Off
START REWEIGH Key
TEST
Version
BAT
A-D
FACTOR
At
Press and
hold
Power Off
Remove Config/
Calibr. Jumper
Figure 9-1. Test Mode Menu Structure
Table 9-2 lists the various display messages when testing the scale.
NOTE:
<-> means the display toggles between the two values.
Table 9-2. Test Mode Menu
Step Function Display Available Parameters
1 Turn the scale on.
While StArt is
displayed, press and
hold the REWEIGH
key. This enters into
the test mode of
the scale. StArt The scale automatically advances to Step
2.
2 Identifies the
software ID IdEnt <-> 11007 Press the REWEIGH key to advance to
the next step.
3 Shows the current
weight value tESt <-> 0.0 To zero the display, press the Kg-Lb key.
To advance to the next step, press the
REWEIGH
key.
4 Shows the current
A/D count A-d <-> XXXX To advance to the next step, press the
REWEIGH key.
5 Checks for current
battery level bAt <-> XXX or nO bAt If the nO bAt is displayed, there are not
batteries in the unit, or the unit is
operating on its external AC adaptor.
To advance to the next step, press the
REWEIGH key.
6 This shows the
calibration factor. FACtOr <-> XXXXX Press the REWEIGH key to return to the
top of the test menu.
To exit test mode, press the REWEIGH
and Kg-Lb key simultaneously, or turn off
the indicator.