4 getting ready to weigh a patient – Rice Lake Legal For Trade Platform/Fitness Scale - Rice Lake Dietary Fitness Scale Technical and Operating Instructions User Manual

Page 7

Advertising
background image

Dietary/Fitness Technical and Operating Instructions - Scale Assembly

3

The Rice Lake Dietary Fitness Scale is capable of running its internal sealed lead-acid rechargeable battery if no

additional power source is available. Battery life is approximately 75 hours. If the

LO Bat

indicator is showing on

the display, recharge the battery or connect the scale to an AC power source as soon as possible for accurate

weighing.

Battery Charging

When the AC adaptor is connected to a power source, the rechargeable battery goes into recharge mode.

NOTE: To maintain battery longevity we recommend you charge it on a regular basis rather than waiting until it is fully
discharged.

The LED indicator light on the back of the scale housing will illuminate red during the charging period, and

change over to green when the battery becomes fully charged.

Load Cell Connections

To gain access to the load cell connection point, remove the four back retaining screws and back cover as shown

in Figure 2-1. Figure 2-2 illustrates where the load cell connection point is.

Load Cell Connection
Point

Figure 2-2. Load Cell Connection Point

2.4

Getting Ready to Weigh a Patient

Once the scale is properly unpacked and set up, and prior to weighing a patient, step on the scale to check the

scale that all functions are working correctly. The scale is calibrated from the factory so simply turn on the scale

and step on the scale to get a weight reading. Press the

REWEIGH

key again to verify that weight.

Figure 2-3. Press the Reweigh Key to Verify Weight

Advertising