Rice Lake MSI6260cs Digital Crane Scale Software Upgrade - Manual (Page 3)

Page 2 of 15
3 Accessing the MSI-6260CS Terminal Menu
3.1 Set the terminal program to emulate an ASCII terminal.
3.2 Set the terminal programs port protocol to 9600 Baud, no parity, 8 data bits and 1 stop
bit.
3.3 Disable flow control in the terminal program.
3.4 Connect scale to variable supply, set to 12.5 VDC, turn scale ON.
3.4 Connect the 6260CS comport to the PC serial port with the 501705-0001 serial cable.
3.5 From PC, press ENTER. Main Cell Scale Manu will appear.
4 Accessing Boot Loader
4.1 Select (7) System.
4.2 Select (8) Load New Application Software.
***** System *****
(1) Clock
(2) Initializations
(3) LED Management
(4) Switch Functions
(5) System Power
(6) Display Device: 9300
(7) RF Modem Installed: Yes
(8) Load New Application Software
(ESC) Exit
Ready to load new application!
Are you sure??
Type YES to complete this action .
Type NO to abort this action.
---------- MSI 9000 - CellScale --------------------
- (c) 2006 Measurement Systems International -
---------------------------------------------------------------
12:01:26 01/05/08
(1) Channels/Calibration
(2) Communications
(3) Display
(4) Feature Locks/Passwords
(5) Product IDs
(6) Set Points
(7) System
(8) About...
Enter choice :