Rice Lake MSI6260cs Digital Crane Scale Software Upgrade - Manual (Page 8)

Page 7 of 15
6.10 Change terminal program protocol to match (i.e. 9600, N, 8, 1).
6.11 Press (ANY KEY). Enter is fine.
6.12 Press ESC to Start Application. Upon pressing ESC, allow a few moments for the Cell
Scale to display the following message.
NOTE: If main menu does not appear after 15 seconds, type MSI9MSI9.
7 Update Verification
7.1 Confirm that the Cell Scale program has been updated by accessing the Cell Scale
application code. Select (8) About.
CellScale will be in Host Mode in 5 seconds.
To enter Terminal Access Mode, type MSI9MSI9
---------- MSI 9000 - CellScale --------------------
- (c) 2006 Measurement Systems International -
---------------------------------------------------------------
12:01:26 01/05/08
(1) Channels/Calibration
(2) Communications
(3) Display
(4) Feature Locks/Passwords
(5) Product IDs
(6) Set Points
(7) System
(8) About...
Enter choice :
When you can read this, press any key.
When you can read this, press any key.
When you can read this, press any key.
When you can read this, press any key.
MSI Boot Loader Version 3.02
(1) Update Application
(2) Change Baud Rate
(ESC) Start Application
Enter Command :
***** About *****
This hardware has not been registered!
(*) Standard Mode: Industry
Software built: 05/14/08 at 14:56:11
Version number: X-YZ
ARC: 0, Rom:9 Ram:
1 0 0 1 0 0 1 0 1