5 updating the boot loader – Rice Lake MSI6260cs Digital Crane Scale Software Upgrade User Manual
Page 4
Page 3 of 15
4.3 The CellScale will prompt if you are sure. Type YES and press Enter.
5 Updating the boot loader.
5.1 Press (1) to Update Application.
5.2 Using the terminal program, send the 3-02 RE-BOOT file.
Note: File must be sent as raw ASCII. Do not use Kermit, X-Modem, Z- Modem or
any other protocol.
5.3 After the file is sent, the re-boot loader program will display the following message.
5.4 Press (ESC) to Start Application (i.e. the reboot loader program).
MSI Boot Loader Version 3.02
action.
(1) Update Application
(2) Change Baud Rate
(ESC) Start Application
Enter Command :
Enter Command : 1
Send (Upload) the file:
Upload complete
Erasing sector 1 of 7
Erasing sector 2 of 7
Erasing sector 3 of 7
Erasing sector 4 of 7
Erasing sector 5 of 7
Erasing sector 6 of 7
Erasing sector 7 of 7
Erase Complete
Programming sector 1 of 7....
Programming sector 2 of 7
Programming sector 3 of 7
Programming sector 4 of 7
Programming sector 5 of 7
Programming sector 6 of 7
Programming sector 7 of 7
Programming Complete
MSI Boot Loader Version 2.15
(1) Update Application
(2) Change Baud Rate
(ESC) Start Application
Enter Command :
MSI Re-BootLoader Version 3.02
(1) Update Main BootLoader
(2) Change Baud Rate
(ESC) Start Main BootLoader
Enter Command : 1
Send (Upload) the file :