Rice Lake MSI6260cs Digital Crane Scale Software Upgrade - Manual (Page 5)

Page 4 of 15
5.5 Press (1) to Update Main Bootloader.
5.6 Using the terminal program, send the 3-02 Boot file.
Note: File must be sent as raw ASCII. Do not use Kermit, X-Modem, Z- Modem or
any other protocol.
5.7 After the file is sent, the re-boot loader program will display the following message.
5.8 Press (ESC) to Start Main Bootloader.
MSI Re-BootLoader Version 3.02
(1) Update Main BootLoader
(2) Change Baud Rate
(ESC) Start Main BootLoader
Enter Command : 1
Send (Upload) the file :
Upload complete
Erasing sector 10
Erase Complete
Programming sector 10....
Programming Complete
MSI Re-BootLoader Version 3.02
(1) Update Main BootLoader
(2) Change Baud Rate
(ESC) Start Main BootLoader
Enter Command :
MSI Boot Loader Version 3.02
(1) Update Application
(2) Change Baud Rate
(ESC) Start Application
Enter Command :