Rice Lake Okidata Microline ML 186 - Manual (Page 29)

29 • Setting Up Your Printer
9. Push back the bail arm lever, ensuring that the paper has been
positioned correctly.
10.Press
SELECT
to place the printer on line.
Testing Your Printer
Your printer has a built-in test (self test) to make sure that it is set
up and working correctly.
1. Load continuous forms paper into the printer (see page 14, ff.).
2. Make sure the printer is turned off, then press and hold
LINE
FEED
while turning the printer on.
The test print begins.
3. To stop the test, press
SELECT
or turn the printer off.
Important
The top of each test printout contains information about your
printer. Be sure to have a copy of the printout handy if you
have to call for service.