Parallel (lpt) connection, ieee1284 – Rice Lake Okidata Microline ML 186 User Manual
Page 32
Advertising
32
• Setting Up Your Printer
Parallel (LPT) Connection, IEEE-1284
Parallel/USB Model Only
Parallel Cable Requirements
• bi-directional
• max. length 6 ft. (1.8 m)
• 36-pin Centronics type connector
1. Turn both the computer and the printer OFF.
Notes
• Interface cables are not supplied with your printer.
• It is not recommended that you connect parallel
and USB cables to the printer simultaneously.
CAUTION!
Make sure the printer and computer are both turned OFF.
Advertising