Using the pull tractor unit, Using the pull tractor unit (if installed) – Rice Lake Okidata Microline ML 186 User Manual
Page 50
Advertising
50
• Operating Your Printer
Using the Pull Tractor Unit
(if installed)
Paper can be loaded from the rear of the printer or, if you have a
slotted printer stand, it can be loaded from the bottom.
1. Remove the acoustic cover (
1
) and access cover (
2
).
2. Adjust the left tractor if necessary, making sure that it is not
more than ½-inch (12.7 mm) from the left end of the tractor unit.
To move the tractor, pull the lock lever (
1
) forward, slide the
tractor to the desired position, then push the lever back to lock it
in place.
Advertising