Testing your printer, Self test (font samples) – Rice Lake Okidata Microline ML 186 User Manual
Page 59
Advertising
59
• Maintenance
Testing Your Printer
Self Test (Font Samples)
Your printer has a built-in test (self test) to make sure that it is set
up and working correctly.
1. Load continuous forms paper into the printer (see page 14, ff.).
2. Make sure the printer is turned off, then press and hold
LINE
FEED
while turning the printer on.
The test print begins.
3. To stop the test, press
SELECT
or turn the printer off.
Note
The top of each test printout contains information
about your printer. Be sure to have a copy of the
printout handy if you have to call for service.
Advertising