Rice Lake PR6202 Hygienic Weigh Module Kits - Manual (Page 23)

Installation Manual Mounting Kits PR 6002
Sartorius EN-21
• Clean the load cell base in both load disks.
• Protect the contact surfaces between load cell/load disks with sufficient grease
.
• Position and install the load cell (10) using the rubber ring for mounting, see Chapter 2.4.
• Put the weighing object (1) again on the mounting kit, using a required lifting tool.
• Remove the rubber ring, see Chapter 2.4.
• Mount the internal lift-off protection (9), see Chapter 2.3