Rice Lake PR6202 Hygienic Weigh Module Kits - Manual (Page 4)

Mounting Kits PR 6002 Installation Manual
EN-2 Sartorius
1 Safety Instructions
The mounting kits PR 6002 must be used only for the weighing applications for which they are intended.
The dimensions of all mounting and structural components must be calculated so that sufficient
overload capacity is ensured for loads which may occur, while taking the relevant standards into
account. In particular, upright weighing objects (vessel etc.) must be safeguarded against the weighing
installation turning over or being shifted, thus eliminating danger to humans, animals or goods even in
the case of a break in a load cell or mounting element.
If soft layers (e.g. from rubber or plastic) for vibration damping or for temperature insulation are
inserted between mounting kit and vessel and/or between mounting kit and supporting construction, a
load equalisation plate must be inserted between soft layer and mounting kit to ensure an even load
distribution on the mounting kit.
Installation and repair work must be carried out only by qualified personnel.
2 Design Recommendations
2.1 Position of Load Cells and Contrainers
* do not constrain this position