Rice Lake RL1200 Portable Beam Scale - Manual (Page 10)

6 RL1200
4. Place the washers and wheels against the frame and insert cotter pins in the holes in the axles. Bend the cotter
pin with pliers to prevent it from slipping out.
Figure 2-4. Run Cotter Pins Through Wheel Axle Holes to Prevent Slipping
5. Finish the wheel assembly by securing axles to frame by securing wheel axle rods with axle locking bolts and
lock nuts. Center the axle and tighten bolt and locknut.
Figure 2-5. Secure Wheel Axle to Frame Using Axle Locking Bolts on Each Wheel
6. Stand the scale base on the floor on its wheels.
Figure 2-6. Place Scale Base on Floor