Rice Lake RL1200 Portable Beam Scale - Manual (Page 9)

Setting Up Your Scale 5
2.3 Setting Up Your Scale
2.3.1 Assemble Wheels onto Frame
1. It is preferable to set the scale base on a box or other item to keep the scale base up off the floor. Tip the scale
base on its side.
Figure 2-1. Scale Base on its Side
2. Place wheel axles through the holes in the frame.
Figure 2-2. Run Axle Through Scale Base Frame Holes
3. Place the wheels and washers on the axles.
Note
Washers must be placed on the insides of the wheels next to the scale frame.
Wheels must be placed with the extended hub next to the scale frame.
Figure 2-3. Place Washers and Wheels on Each Axle