Garmin GPS 65 - Manual (Page 23)

Navigation Summary
The Navigation Summary Page displays direction, distance and speed
information to direct you along a route or a GOTO destination. The
active leg(route) waypoints or GOTO waypoint is shown at the topof the
screen. The GDI is at the bottom of the page. Current CDl scale setting
is shown at each end of the scale. This is replaced by the cross track
distance if the D-Bгtr goes off the scale. A relative bearing pointer at the
center of the CDI indicates Gie bearing to the waypoint relative to the
current track (TRK).
Notice that this pa^ has four cyclic
fields available. The field options
are as follows:
Field #1 (top left) provides a choice
of: (a) bearing to destination
waypoint (BRG), (b) course to steer
(CTS), (c) desired track (DTK),
id)
ground track (TRK), or (e) turn
(TRN).
GO TO GARMIH
.ш1в7»>«10.5
>ткк126>с: IB.8
l.D
Jt
1-0
■ ■ • e • « • «
1дм;ндта1ка1 ым
* Prêts the softkty
under CDI.
Field #2 (top right) provides a choice
of: (a) range todestination waypoint
(RNG), (b) cross track error (XTK),
(c) aloi^ track distance (ATD), or
(d) distance made good, back to
starting point (DMG).
Field #3 (bottom left) provides a choice of: (a) ground track (TRK), (b)
course made good (CMG), or (c) ground speed (GS).
Field #4 (bottom right) provides a choice of: (a) ground speed (GS), (b)
estimated time enroute (ETE), (c) estimated time of arrival (ETA), or (d)
velocity made good (VMG). (See Appendix B for a description of
navigation terms.)
TRKISE' CARHINCf IflKT
BRG oar RM Б.7МИ 45:85
1пш1Д1м;|1яю11 CDI
*
Press the softkey
under PLOT.
Course Deviation Indicator
The CDI Page shows a graphic
“highway” display. The active
waypoint is shown at the top of the
screen. Navigationvalues for Track
(TRK), Ground Speed (GS), Bearing
(BRG), Range(RNG), and Estimated
Time Enroute (bottom right) are
shown. The center-line of the
highway represents the desired
3-9