Garmin GPS 65 User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Slide the gimbal bracket slots over the threaded portion of the
knobs so that the lobed section of the gimbal bracket faces
downward as shown dashed in the figure below.
• Pull the gimbal bracket downward, clamping the GPS 65 tightly
against the panel. Tighten the knobs securely.
* Connect the Power/Data Cable and the Antenna Cable.
The flush mount will accommodate panel thicknesses up to 7/16" thick.
Thicker panels may require customizing the gimbal bracket or the use
of standard M6
x
1mm
x
12mm screws rather than the knobs supplied.
C-7
Advertising