Garmin GPS 65 - Manual (Page 36)

To copy a route...
< Select the Route Definition Page
(RTE).
* Highlight the route number field
and select the route number to
copy from with CLR.
* Highlight the route action field
with the arrow keys and press
CLR until “>Copy To>" is
displayed.
A third field now appears in the top right comer. Highlight this
field and select the destination route number with CLR.
Press ENT. The route is now copied.
Rte >0 HWBRIWiH
GBRUIN
KVfiP 178* 1.83
CLIFF 263* 3.51
RZRBCK 330* 5.05
MIDRMR 042* 5.00
____ LISL, fttm RTE
4.3 ACTIVATING ROUTES
Routes are activated on the Route Definition Page also. You may
activate any route in the displayed order, or in reverse order. (NOTE:
Remember, when a new route is activated, the previous contents of
route 0 will be overwritten. If you wish to save route 0, be sure to copy
it to an empty route first.)
To activate a route...
' Select the Route Definition Page
(RTE).
Rte^l
GflRMIN___*_____
KVflP
CLIFF
RZRBCK
MIDflMR
LIST
178*
263*
330*
042*
1.83
3.51
5.05
5.00
ftCTU ME
^ I n r t ?
GRRMIH
KVflP 173* i;S3
CLIFF 263* 3,51
RZRBCK 330* 5.05
MIDRMR 042* 5.00
LIST ACTU RTE
• Highlight the route number field
and select the route number to
activate with CLR.
• Highlight the route action field,
and with CLR select “>Activate?”.
• Press ENT to activate the route.
To invert a route...
• Follow the same steps as above for
activating a route, but select,
“>Invert?” at the route action field.
• Press ENT to activate the route in
an inverted order.
4-3