Bissell ProHeat 2X 9200 SERIES - Manual (Page 13)

o.
o
O
O
o
o
<D
Purge the hose to eliminate cleaning solution from
the tube by spraying clean water through the hose
without attachments into a sink for 15-30 seconds.
Attach Scotchgard post-applicator cartridge to the
Applicator Tool, following the instructions on the
cartridge. Attach the combined Tool/Cartridge to
the hose. The water from the 2-in-1 Tank will
automatically mix with the concentrated Scotchgard
post-treatment formula contained in the cartridge.
Turn the Custom Clean Dial to the ...
Rlnse/Protect setting
Before applying Scotchgard protector to a large,
area, test in a small, hidden area for colorfastness.
Examine area when dry. If color is affected, do not
use. For use on upholstery, look for manufacturer’s
cleanability code tag. Use only on fabrics coded
“W" or “WS”. If coded “S" or “X", do not use. Not
recommended for use on velvet, silk vinyl, leather,
or 100% cotton upholstery. ■ ■
Apply Scotchgard protector in a slow sweeping ■
motion with a slight overlap of the treated area. For
best coverage, follow the guide on the cartridge. ■ ■
One 8 oz. cartridge protects 200 square feet
(18.6 sq. meters). This is equal to two average ■
size rooms, (each at 10 x 10 ft. or 3 x 3 meters).
Periodically check the level in the bottle to ■
ensure the best coverage. ■
Be careful not to spray the protector onto furniture
or fabric that has not been tested for colorfastness. -
Ifthisdoesoccur, wipe off the protector. ■ . .
Remove the bottle from the spraying applicator tool.
If concentrate is left, replace the cap to the cartridge .
and store at room temperature for later use. :
With the applicator tool still on the end of the ■
hose, spray clean hot water into the sink to avoid ■
any future clogging.
Store tool in a convenient location for use the
next time.
If clogged, soak
applicator tool
In hot tap water
before using.
; ^ o I
■: j fi',
f \
;dii '