Bissell ProHeat 2X 9200 SERIES - Manual (Page 16)

Be sure to test any spot removal formulas in an
inconspicuous area first. This is important as
some dyes and materials could be damaged or
discolored by cleaning solvents. If such a change
should occur, try a different solution or call
a professional.
o
If cleaning on Berber carpeting, gently run your
machine over a hidden area. If no fuzzing occurs,
continue cleaning in soiled area.
Using the BISSELL Tough Stain PreCleaner,
spray evenly over soiled area.. Do not overwet.
Wait 3-5 minutes. Gently work the solution
by blotting area with a clean, damp, color safe
cloth. '■ ■■ t /3^ :
■ ;
Clean using either the Floor Setting, or Hose
Attachment Setting on tlie Ready Tools Dial.
Your ProHeat 2X model may have already come
with a Bare Floor attachment and Hard Floor
Solutions Formula. If not, these products are
available for purchase by contacting the BISSELL
Consumer Services department by phone or at
the website. The Bare Floor tool provides effective
cleaning for iinoieum, vinyl, and tile floors.
Caution: Do not use on hardwood floors.
Vacuum or Sweep thoroughly to pick up any
loose debris and pet hair. .
■ .
0
0
Move any furniture, if needed. ■■ ■
Emp^ any carpet cleaning formula back into the
BISSELL bottle if stored in the Formula Tank. Fill
.Formula Tank with BISSELL Flard Floor Solutions,
available at many reteilers, or contact BISSELL
Consumer Services. ^ v
o
0
0
0
0
Fill the WaterTank with Flot jap Water and Set Aside.
Attach the Bare Floor Tool onto the bottom of the
.machine underneath the Floor Nozzle.
Check Ready Tools Dial. It should be set on
Floor Cleaning.
Set the Custom Clean Dial to Normal Clean.
Plug into an outlet and turn the Power Switch
and Fleater ON ( I ) .