Bissell ProHeat 2X 9200 SERIES - Manual (Page 14)

Your ProHeat 2X machine comes equipped with
a hose and at ieast 1 attachment for cieaning
stairs, uphoistery, and more.
e Important! if using to ciean Uphoistery, check
Upholstery Tags,
. A. Check manutacturer’s tag before
■ . . ■■ cieaning. “W” or “WS" on the tag means
■ ■ ■ ■ you can use your ProHeat 2X. it the tag
■ ■ is coded with an “X” or an “S" (with a
. ■■ . diagonal stripe through it), or says “Dry
■ ■■ Clean Only", do not proceed with any
■ deep cleaning machine. Do not use on
. . : Velvet or Si|k. It manufacturer’s tag is
■ ■ missing or not coded, check with your
■ . ■ furniture dealer. ■ ( ■ '
■ B. Check for colorfastness ip an
■ ... inconspicuous place. ; ■ .
■ G. It possible, check upholstery stuffing.
■ ■ Colored stuffing may bleed through
■ ■ fabric when. wet. '
.................D. Plan activities to allow upholstery time
.. to.dry.
................... E. Vacuum thoroughly to pickup loose
..................... debris and pet hair. Use a vacuum
with a brush attachment and a crevice
tool to clean, in tabric folds.
o
o
o
o
o
Follow the instructions on pages 9 & 1.0 for
filling the Water Tank and the Formula Tank.
Set Ready Tools Dial to the Hose
Attachments Setting, This will allow spray and
suction from the hose. .
o
o
Set Custom Clean Dial tor Heavy Traffic, Normal
Clean, Light Clean, ot Rinse, as desired
Attach the cleaning tool to the end of the hose.
Plug in and turn op the Power Switch and Heater
(if desired). ■
- y'
Clean by pressing the trigger to spray solution
onto the.area to be cleaned. Slowly move the tool
back and forth over the soiled surface. Release
the trigger to suction soiled water. Continue to
clean in the area, working in small sections, until
no more dirt can be removed. Rinse (optional)
and suction as needed.
Caution: Do no overwet.
Remove and rinse tools in clean, running water.
Dry and replace in the Tool Caddy.
It is recommended that you suction clean water
from the tap to rinse out the hose. Before replac­
ing lift end of hose and stretch out to ensure all
water is cleared from hose.
Coil Flex hose around the Tool Caddy.
A w ARNING:
To reduce the risk of
injury, be extra careful
when cleaning stairs.
Make sure machine is
secure and level.