B&C Technologies HI Series Commercial - Manual (Page 14)

Installation
Theory of Operation
14
unlatching the cover door. Supplies, both
liquid and powder; may be added by
pulling the dispenser cups out and placing
the appropriate supply in each. Supplies are
flushed into the machine at the proper time
in the cycle, controlled by the EL6.
Holes are provided in the top of the supply
dispenser (HI-125) or at the rear of the
machine (HI-85) for connection to an
external, central liquid supply unit. Electrical
connections are provided for the liquid
supply unit on a terminal strip inside the
rear control module. Refer to page 22 for
connection details.