B&C Technologies HI Series Commercial - Manual (Page 28)

HI-85 Door Lock Operation
Operation
The lock system uses a "push-to-open /
push-to-close" style mechanism which
differentiates it from any other door lock in
the industry. This design was developed as
a result of analyzing the shortcomings of
other door lock mechanisms on the market.
It hence has many fundamental safety &
mechanical advantages.
Operation
Opening & Closing
To open the door the machine must not be
running a wash program -- "Program N"
should be displayed on the EL6. Simply
push and release the door handle with the
palm of your hand. As you push the handle
in the door lock solenoid will energize and
the pin will retract and release the door.
Then as you release the pressure on the
handle the door will be free and you can
pull it open. To close the door swing it
closed, then push the handle firmly until
you hear the solenoid engage, releasing the
door lock pin to lock the door. When you
start a wash program the door lock is
securely disabled so that the door cannot be
accidentally opened.
·
Periodic Maintenance
>The door should be tested every day for
safe operation by trying to start a program
with the door open. If the machine will
begin operation in this state it should
immediately be removed from service,
locked out, and a qualified service
technician called to repair it.
>If the door lock is malfunctioning in any
way, the machine should immediately be
removed from service, locked out, and a
qualified service technician called to repair
it.
>The door lock pin and handle hinge
should be lubricated with "silicon spray
lube" monthly. This product is available at
almost any auto parts store. This procedure
does not require any disassembly.
>The door handle nose bushing should be
checked for wear and cracking monthly. It
should be replace when it is cracked,
missing, or worn out.
>The door lock tongue and lock pin
alignment should be checked monthly and
adjusted as needed.
>For detailed instructions on door
alignment, request TSB009 when
contacting technical service.
28