Canon GL2 - Manual (Page 117)

1 CONTINUOUS
When the file numbers are set to CONTINUOUS, each image is
assigned a different number, avoiding duplication of numbers. If a
memory card already contains files, the lowest available number file
will be assigned to the added file. This is convenient when you wish
to manage your images on a PC. We recommend keeping the file
numbers set to CONTINUOUS.
Set the image file numbers so that they reset each time a new memory card is inserted, or so that
they count up continuously.
The still images are automatically assigned file numbers from 0001 to 9999 and stored in folders of
9999 images each. Each folder is numbered from 100 to 999 and recorded on the memory card.
100-0001
100
100-0002
100-0003
100-0004
100
100-0001
100
Three images are
recorded on the card.
When you insert a new empty
card and take a picture. 1 2
117
E
Using a Memor
y Car
d
2 RESET
Each time you insert a new memory card, the file number resets to its default value (100-0001). If
the memory card already contains files, the lowest available file number in the folder with the
highest number will be assigned to the added file.
To change the file numbering, open the menu and select CARD SET UP. Then
select FILE NOS., set it to RESET and close the menu.
FILE NOS.••• CONTINUOUS CARD SET UP
( 20)
SHTR SOUND•• ON CARD SET UP
( 20)
To turn the shutter sound off, open the menu and select CARD SET UP. Then select
SHTR SOUND, set it to OFF and close the menu.
Makes the sound of a shutter being released when a still image is recorded to a memory card.
+
CAMERA CARD
+
CAMERA CARD
File Numbers
Turning Off the Shutter Sound